Welcome To our shop !

1/10 RC Egress (2013)

$100.00 $500.00

This is a re-release of the iconic Egress 4WD off-road racing buggy. The Egress first appeared in 1989. It was a follow up kit to the Avante kit, which had a huge fan following. The original Egress featured stacks of special racing parts. The Egress (2013)

Qty:

Payment:

Payment Option Image

This is a re-release of the iconic Egress 4WD off-road racing buggy. The Egress first appeared in 1989. It was a follow up kit to the Avante kit, which had a huge fan following. The original Egress featured stacks of special racing parts. The Egress (2013) builds upon the racy original of the same name, adding modern parts to bring it fully up to speed with available battery and motor technologies available in the hobby market today.

This shaft-driven 4WD chassis features a longitudinally positioned motor and full ball bearings, while carbon fiber upper and lower decks ensure that the model has superb strength. Re-designed front and rear ball differentials offer excellent reliability and easy maintenance, working in tandem with the built-in center one-way to provide sure-footed movement. The one-way bearing is lockable as a set up option. Universal drive shafts feature the same design as those used in the current TRF series parts, to maximize power transmission and improve resistance to wear and tear. 4-wheel double wishbone suspension, supported by four oil dampers equipped with aluminum cylinders, while the front and rear of the model is equipped with stabilizers for enhanced corning performance. Aluminum front uprights offer excellent reliability, and ball bearings in steering linkage arms combine with 2mm thick carbon fiber plate to offer a linear steering response.

  • Length: 430mm, Width: 243mm, Height: 157mm
  • Wheelbase: 275mm
  • Tread (Front & Rear): 200mm
  • Carbon Fiber Double Deck Frame
  • Shaft-Driven 4WD
  • Polycarbonate Body and Undertray
  • Front & Rear Ball Differentials + Center One-Way
  • 3-Piece Steering Tie Rod
  • 4-Wheel Double Wishbone Suspension
  • Tire Width/Diameter: 32/88mm (Front), 40/88mm (Rear)
  • High-Capacity Aluminum Cylinder Oil Dampers
  • Gear Ratio: 8.25:1 (When using kit-included 22T pinion)
  • Requires Type 540 Motor and Electronic Speed Controller

Tamiya RC kits are high quality radio control products offering precision engineering, and home to a variety of popular RC cars, trucks, and buggies, perfect for all skill levels.

To operate your Tamiya RC, you must get one of our electronics bundles.Kits do not include electronics.

Basic Bundle (TRCTXBUNDLE)[$119.99]
1x Flysky GT2F, 2.4Ghz 2 Channel Wheel Transmitter & Receiver
1x AC Charger 2amp with Tamiya Plug in Zip Bag, Charges 4-8 nimh/nicad
1x Tornado 2400MAH 7.2v Nimh Stickpack with Tamiya Plug
1x Standard Servo
Note: To complete the required electronics set, you also need to purchase 1x Hobbywing Brushed 60A Waterproof ESC (
HWAPWP1060).

Advanced Bundle (
RCCOMBO2)[$199.00]
1x CH4 Transmitter 2 . 4 GHZ Super Response 4 – Channel Radio
1x 60A Brushed ESC 60A ESC Plug
1x 9KG S0900M Metal gear servo
1x AC/DC 80W 7.0A Charger
1x 7.2V 5000mAh NiMH Battery Pack

Reviews

There are no reviews yet.

Be the first to review “1/10 RC Egress (2013)”

Your email address will not be published. Required fields are marked *